Modified an Automatic-Cleaning Strainer for Seawater Cooling System in Combined Cycle Power Plant
DOI:
https://doi.org/10.12962/jaree.v9i2.468Abstract
The power plant industries on the coast use seawater as a cooling water system. Seawater conditions in densely populated areas, such as Jakarta, have high levels of pollutants which can affect cooling water systems. To filter seawater from pollutants, a strainer is used due to reliability must be maintained. This research is located at a power plant in North Jakarta. This research describes the latest proposed design of an automatic-cleaning strainer that poses less risk to the system and is faster in the work process. The results of this design were implemented at the generating company. This design can maintain strainer reliability with a faster strainer cleaning process, which reduces the TTR (Time to Repair) in the generating unit from 3 hours to 5 minutes, with no risk of damage to the system due to foreign material in the cooling water system. In addition, the results of this research help improve plant operation and maintenance performance, by increasing EAF 1.11%, increasing 1 level in Maintenance Mix Cost and Manhour from Level 4 to Level 5, increasing Reliability Management by 0.1 level, and also reducing EFOR by 0.98%. Work processes that are carried out automatically via smartphones also contribute to the digitization of the power generation industry to make it more effective and efficient.References
D. Dwiyitno, C. Schwanen, H. I. Januar, F. Ariyani, H. E. Irianto and J. Schwarzbauer, "Microplastic profile in the sediment of Jakarta Bay estuary, Indonesia: Characterization based on size fraction and the potential risk to the ecosystem," Regional Studies in Marine Science, vol. 73, 2024. https://doi.org/10.1016/j.rsma.2024.103465
L. Dsikowitzky, S. van der Wulp, D. F. Ariyani, K. Hesse, A. Damar and J. Schwartzbauer, "Transport of pollution from the megacity Jakarta into the ocean: Insights from organic pollutant mass fluxes along the Ciliwung River," Estuarine, Coastal and Shelf Science, vol. 215, pp. 219-238, 2018. https://doi.org/10.1016/j.ecss.2018.10.017
W. Y. Qi, Y.-W. Wei, Z. Wang, S.-C. Gong, C. Song and S.-G. Wang, "Does the concentration ratio contribute to the scaling of circulating cooling seawater?," Desalination, vol. 576, 2024. https://doi.org/10.1016/j.desal.2024.117347
P. Kuznietsov, "Evaluation of the scaling and corrosive potential of the cooling water supply system of a nuclear power plant based on the physicochemical control dataset," Data in Brief, vol. 54, 2024. https://doi.org/10.1016/j.dib.2024.110347
G. Tilocca, D. Sánchez and M. Torres-García, "Applying the root cause analysis methodology to study the lack of market success of micro gas turbine systems," Applied Energy, vol. 360, 2024. https://doi.org/10.1016/j.apenergy.2024.122717
M. Song, C. Reinartz, X. Zhang, H. P.-J. Thunem and R. Mcdonald, "MFM-based alarm root-cause analysis and ranking for nuclear power plants," Nuclear Engineering and Technology, vol. 55, p. 4408–4425, 2023. https://doi.org/10.1016/j.net.2023.07.034
A. Nadya, A. Faieza, Z. Norzima and H. Ismail, "Design and Development of New Debris Strainer in Water Treatment Plant," Procedia Computer Science, vol. 76, p. 209 – 216, 2015. https://doi.org/10.1016/j.procs.2015.12.344
T. Altmann, A. Rousseva, J. Vrouwenvelder, M. Shaw and R. Das, "Effectiveness of ceramic ultrafiltration as pretreatment for seawater reverse osmosis," Desalination, vol. 564, 2023. https://doi.org/10.1016/j.desal.2023.116781
A. O.H.I. and A. H.M.H, "Application of Ultra-Filtration Technique as a Water Purification Technology in Egypt-Case Study," International Research Journal of Advanced Engineering and Science, vol. 6, no. 2, pp. 174-178, 2021. ISSN (Online): 2455-9024
N. D. Cano, A. P. Camargo, N. Ait-Mouheb, G. L. Muniz, J. A.Y. Guarnizo, D. J. Pereira and Frizzone, "Optimisation of the filter housing dimensions of an automatic flushing strainer-type filter," Biosystems Engineering, vol. 219, pp. 25-37, 2022. https://doi.org/10.1016/j.biosystemseng.2022.04.019
N. D. Cano, A. P. d. Camargo, G. L. Muniz, A. J. Guarnizo and J. A. Frizzone, "Automatic Flushing Strainer-Type Filter: A Method for Actual Filtration Grade Assessment," Journal of Irrigation and Drainage Engineering, vol. 149, no. 6, 2023. https://doi.org/10.1061/JIDEDH.IRENG-9876
B. Sayinci, "The influence of strainer types on the flow and droplet velocity characteristicsof ceramic flat-fan nozzles," Turkish Journal of Agriculture and Forestry, vol. 40, no. 1, pp. 25-37, 2016. https://doi.org/10.3906/tar-1411-140
M. A. Patel and S. H. Saheb, "Study on Design and Analysis of Industrial Y Type Strainer," in IOP Conference Series: Materials Science and Engineering, Canada, 2021. https://doi.org/10.1088/1757-899X/1126/1/012025
G. P. Mahajan and R. S. Maurya, "Development of an efficient t-type strainer with its performance evaluation," Journal of Thermal Engineering, vol. 6, no. 6, pp. 420-433, 2020. https://doi.org/10.18186/thermal.836499
P. Jain and P. Jain, "Product Planning and Development of Bucket Type Strainer Used In Thermal Power Plant," IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), vol. 3, no. 2, pp. 29-35, 2012. ISSN (Online): 2278-1684
A. Bahadori, "Chapter 14 - Strainers and Filters," in Oil and Gas Pipelines and Piping Systems; Design, Construction, Management, and Inspection, 2017, pp. 377-394. https://doi.org/10.1016/B978-0-12-803777-5.00014-9
D. Gothwal, A. Dhumal, A. Gang, S. Gavali and S. Shinde, "Review On Automatic-Cleaning Basket Strainer," International Journal of Scientific & Technology Research, vol. 4, no. 4, pp. 154-156, 2015. ISSN 2277-8616
I. Min, J. Choi, G. Kim and H. Jo, "CFD Analysis of the Pressure Drop Caused by the Screen Blockage Rate in a Membrane Strainer," MDPI Processes, vol. 12, no. 4, 2024. https://doi.org/10.3390/pr12040831
N. Iskandar, S. H. and A. Y. Sadewa, "Design and Analysis of Self-Cleaning Type Water Strainer," International Research Journal of Innovations in Engineering and Technology (IRJIET), vol. 6, no. 10, pp. 90-96, 2022. https://doi.org/10.47001/IRJIET/2022.610014
J. Shahane, R. Deshmukh and S. Thakare, "SC Filter Cleaning Mechanisms: A Review," International Journal of Research in Engineering, Science and Management, vol. 2, no. 3, pp. 806-810, 2019.
B. Fereidooni, M. Morovvati and S. Sadough-Vanini, "Influence of severe plastic deformation on fatigue life applied by ultrasonic peening in welded pipe 316 Stainless Steel joints in corrosive environment," Ultrasonics, vol. 88, pp. 137-147, 2018. https://doi.org/10.1016/j.ultras.2018.03.012
Z. Ren and F. Ernst, "Stress–Corrosion Cracking of AISI 316L Stainless Steel in Seawater Environments: Effect of Surface Machining," MDPI Metals, vol. 10, no. 10, 2020. https://doi.org/10.3390/met10101324
D. Li, Q. Liu, W. Wang, L. Jin and H. Xiao, "Corrosion Behavior of AISI 316L Stainless Steel Used as Inner Lining of Bimetallic Pipe in a Seawater Environment," MDPI Materials, vol. 14, no. 6, 2021. https://doi.org/10.3390/ma14061539
B. Mercan, B. L. Volk, M. Campbell and P. Guerin, "Feasibility of Steel and HDPE Sea Water Intake Risers for Deepwater Applications," in Offshore Technology Conference, Houston, 2024. https://doi.org/10.4043/35060-MS
H. P. Prabawa, D. Mugisidi, M. Yusuf D. and O. Heriyani, "Pengaruh Variasi Ukuran Diameter Nozzle terhadap Daya dan Efisiensi Kincir Air Sudu Datar," in Seminar Nasional Sains dan Teknologi 2016 Fakultas Teknik Universitas Muhammadiyah Jakarta, Jakarta, 2016.
Downloads
Published
Issue
Section
License
Copyright
Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis or report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. Authors or others are allowed to multiply article as long as not for commercial purposes. For the new invention, authors are suggested to manage its patent before published. The license type is CC-BY-NC 4.0.
Disclaimer
No responsibility is assumed by publisher and co-publishers, nor by the editors for any injury and/or damage to persons or property as a result of any actual or alleged libelous statements, infringement of intellectual property or privacy rights, or products liability, whether resulting from negligence or otherwise, or from any use or operation of any ideas, instructions, procedures, products or methods contained in the material therein.
