FLC-DTC Method for Torque Ripples Minimization of 8/6 Switched Reluctance Motors Drive
DOI:
https://doi.org/10.12962/j25796216.v4.i1.114Abstrak
The switched reluctance motor gains a significant response in industries in the past decade because of its ruggedness, high torque to inertia ratio, simple structure, high reliability and inexpensive manufacturing capability. These features make it a suitable candidate for various applications and electric drives. However, In the field of electric drives a switched reluctance motor drive is having doubly salient structure thus it inherently produces high torque ripples and acoustic noise problems and its controlling difficulties that is an undesirable effect for vehicle applications, especially at low speed. The main objective of this paper is to minimize the torque ripples and to control its speed. In this paper a fuzzy logic controller based direct torque control method is used for speed controlling and for controlling of torque ripples of the 8/6 SRM drive. It’s modelling and application of fuzzy logic controller based direct torque control method is done in MATLAB/SIMULINK environment.
Keywords: acoustic noise, direct torque control, fuzzy logic controller, ripple control, switched reluctance motor, torque ripples.
Referensi
E. S. Jebarani and K. S. Suresh, "Torque ripple minimization of switched reluctance drives - a survey," presented at the 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), 2010.
I. H. Altas and A. M. Sharaf, "A generalized direct approach for designing fuzzy logic controllers in Matlab/Simulink GUI environment," International Journal of Information Technology and Intelligent Computing, vol. 1, pp. 1-27, 2007.
V. Pushparajesh and T. Manigandan, "Torque ripple minimization of direct torque controlled four phase switched reluctance motor using artificial intelligent controller," World Journal of Modelling and Simulation, vol. 12, pp. 163-174, 2016.
R. T. Naayagi and V. Kamaraj, "Optimum Pole Arcs for Switched Reluctance Machine with Reduced Ripple," presented at the International Conference on Power Electronics and Drives Systems, 2005.
I.-S. Marija, T. J. Miller, S. R. MacMinn, and J. S. Thorp, "Instantaneous torque control of electric motor drives," IEEE Transactions on Power Electronics, Vol. PE-2 , Issue: 1, pp. 55-61, 1987.
S. Pratapgiri and P. P. V. Narsimha, "Direct torque control of 4 phase 8/6 switched reluctance motor drive for constant torque load," World J. Model. Simul, vol. 8, pp. 185-195, 2012.
M. Rajib, I. Husain, Y. Sozer, M. S. Islam, and T. Sebastian, "Torque-ripple minimization of switched reluctance machines through current profiling," IEEE Transactions on Industry Applications, vol. 49, pp. 1258-1267, 2013.
S. Sanjib, K, S. K. Panda, and J.-X. Xu, "Indirect torque control of switched reluctance motors using iterative learning control," IEEE Transactions on Power Electronics, vol. 20, pp. 200-208, 2005.
##submission.downloads##
Diterbitkan
Terbitan
Bagian
Lisensi
Copyright
Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis or report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. Authors or others are allowed to multiply article as long as not for commercial purposes. For the new invention, authors are suggested to manage its patent before published. The license type is CC-BY-NC 4.0.
Disclaimer
No responsibility is assumed by publisher and co-publishers, nor by the editors for any injury and/or damage to persons or property as a result of any actual or alleged libelous statements, infringement of intellectual property or privacy rights, or products liability, whether resulting from negligence or otherwise, or from any use or operation of any ideas, instructions, procedures, products or methods contained in the material therein.
