Planning of Arrayed Waveguide Grating (AWG) for 16x16 Channels Transmission System of Dense Wavelength Division Multiplexing (DWDM)
DOI:
https://doi.org/10.12962/j25796216.v2.i1.41Abstrak
Arrayed Waveguide Grating (AWG) Technology, one technique of dividing the channel into smaller sub-channels by adjusting the fixed array length increment. AWG techniques can generate coherent transmissions, which are suitable for Wavelength Division Multiplexing (WDM), to be implemented as multiplexer, demultiplexer, filter, add-drop device, and more. This paper discusses the design planning of AWG parameters operating on C-Band channels (1530-1560 nm), to support the needs of WDM channels, especially Dense-WDM (DWDM). Planning is done using WDM-Phasar tool and through theoretical calculations with MatLab. Theoretical calculations aim to produce ideal design parameters, while through WDM-phasar by adding the device size limit, crosstalk and nonuniformity values, it is expected to obtain more realistic design parameters. The parameters observed include the magnitude of the diffraction order (m), the length of the free propagation range (FPR), the difference in array length (ΔL), the number of arrays (Narray), number of I/O (Nmax) and free spectral range (FSR) channels. By using 16 channels of 100 GHz (0.8 nm) in the C-band, the size of the device (15000x9000 μm2), crosstalk (-35 dB) and nonuniformity (0.5), through WDM-Phasar assistance the AWG parameter 1197.347 μm (FPR), 23.764 μm (ΔL), 41 (m), 56 (Narray), 16 (Nmax) and 11.2 nm (FSR). While ignoring the device size, crosstalk and non-uniformity variables, theoretical parameters were generated at 1308.61 μm, 25.1698 μm, 43.7143, 108 pieces, 27 channels and 21.211 nm, respectively for FPR, ΔL, m , Narray, Nmax and FSR. or WDM system capacity (16x16).
Keywords: AWG, WDM, C-Band, crosstalk, non-uniformity
Referensi
Mohammed, A.E.N.A., Rashed, A.N.Z., Saad, A.E.F.A. (2009), “Estimated optimization parameters of arrayed waveguide grating (AWG) for C-band applications”, International Journal of Physical Sciences Vol. 4, pp. 149-155.
Keiser, G. (2000), “Optical Fiber Communications, third efition, Mc Graw Hill International Edition.
Research Centre for Microtechnology (2010), “Arrayed Waveguide Gratings: tiny structures for big ideas, Application Note, FHV Research”, DWDM 05.
Adam, I., Ibrahim, M.H., Kassimet AL, N.M. (2008), “Design of Arrayed Waveguide Grating (AWG) for DWDM/CWDM, Applications Based on PCB Polymer”, Elektrika ,vol. 10, no. 2, pp. 18-21.
Leijtens, X.J.M., Kuhlow, B., Smit, M.K. (2006), “Arrayed Waveguide Gratings, Wavelength Filters in Fibre Optics”, Springer Series in Optical Sciences, Volume 123. ISBN 978-3-540-31769-2. Springer-Verlag Berlin Heidelberg, pp.125.
Gudeny, M., Piprek J. (1996), “Material Parameters of Quaternary III–V Semiconductorsfor Multilayer Mirrors at 1,55μm Wavelength”, Modelling Simul. Mater. Sci. Eng. 4, pp. 349–357, Printed in the UK.
Linnik, M., Christou A. (2002), “Calculations of Optical Properties for Quaternary III-V Semiconductor Alloys in the Transparent Region and Above (0.2-4.0 eV), Physica B, 318, pp. 140-161, University of Maryland.
International Telecommunication Union (2012), “Spectral Grids for WDM Applications: DWDM Frequency Grid”, Recommendation ITU-T G.694.1, Approved in 2012-02.
International Telecommunication Union (02/2012), “Transmission characteristics of optical components and subsystems”, Recommendation ITU-T G.671.
International Telecommunication Union (12/2003), “Spectral grids for WDM applications: CWDM wavelength grid”, Recommendation ITU-TG.694.2.
Andika G., Mustafa H.C., Hamzah K., Kusuma T. (2006), “Teknologi WDM pada Serat Optik”, Departemen Elektro Fakultas Teknik Universitas Indonesia.
Amersfoort M. (1998), “Array Waveguide Grating”, Concept to Application note A1998003, Concept to Volume.
.Abdullah, G.H., Mahdi, B.R., Al Jabar, N.A. (June 2012), “Design Thin Film Narrow Band-pass FiltersFor Dense Wavelength Divisi
##submission.downloads##
Diterbitkan
Terbitan
Bagian
Lisensi
Copyright
Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis or report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. Authors or others are allowed to multiply article as long as not for commercial purposes. For the new invention, authors are suggested to manage its patent before published. The license type is CC-BY-NC 4.0.
Disclaimer
No responsibility is assumed by publisher and co-publishers, nor by the editors for any injury and/or damage to persons or property as a result of any actual or alleged libelous statements, infringement of intellectual property or privacy rights, or products liability, whether resulting from negligence or otherwise, or from any use or operation of any ideas, instructions, procedures, products or methods contained in the material therein.
