Impact of Shape and Total of Particle to Characteristics of Partial Discharge and Breakdown Voltage on Oil Insulation in Uniform Field

Daniar Fahmi, I Made Yulistya Negara, R. Wahyudi, Dimas Anton Asfani, Made Yudhi Setyawan, Mochammad Wahyudi

Abstract


Oil insulation is one of the insulation medium types commonly used in high voltage apparatus. This insulation is to separate between the conductive part and non-conductive part. However, oil insulation can experience decreasing of dielectric strength. It may be caused by the presence of solid particles. Therefore, the testing was conducted to obtain the effect of solid particles to characteristics of partial discharge and breakdown voltage of oil insulation. The results generally proved that the existence of solid particles can reduce the breakdown voltage value of oil insulation. In addition, the solid particles led to two types of corona on oil insulation, namely positive and negative corona.

 

Keywords: oil insulation; partial discharge; breakdown voltage; corona; particle shape; particle total.


Full Text:

PDF

References


I.M.Y. Negara, Technique of High Voltage: Principle and Pratical Application (in Indonesian), Yogyakarta: Graha Ilmu, 2013.

E. Koffel, W.S. Zaengl, and J. Kuffel, High Voltage Engineering Fundamentals, Oxford: Butterworth-Heinemannn, 2000.

M. Holmberg, Motion of Metallic Particles in Gas Insulated Systems. Goteborg: Chalmers University of Technology, 1997.

Y. Khan, Particle Triggered Breakdown Characteristics and Methods of Particle Deactivation around Spacers in Simulated GIS. Fukuoka: Kyushu University, 2004.




DOI: https://doi.org/10.12962/j25796216.v2.i1.35

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.