Ladder Diagram Design Based On Cascade Method For Selection And Assembling Part On Dual Conveyor Plant

Eka Iskandar, Mochammad Rameli, Rafly Adiyat

Abstract


Abstract— The transfer of goods from one place to another in the production process in a common industry we encounter using conveyors. Conveyors have replaced human labor used in moving production goods from one place to another in the industry. By using conveyors, the transfer time can be reduced and not dependent on humans anymore. Conveyor control can use a controller in the form of a PLC. PLC programming can use many methods, one of which is the cascade method. The beginning of the development of this method is widely used in pneumatic systems, but as time goes by this method is used in completing sequential systems. The ideal cascade method is used for sequential processes without an iterative process, the theory is easy to understand, the results are easy to implement. In this study the type of PLC used is CPM1 from OMRON. By using Cascade method, the result from construction of ladder diagram is obtained by 59 rung, 6 timer, 18 relay, and the program capacity is 3 KB.

Keywords: Conveyor, PLC, Ladder diagram, Cascade method, relay group.


Full Text:

PDF

References


Dr Ilango Sivaraman, Pneumatics and Pneumatic Circuits: Industrial Applications of Compressed air, Dr Ilango Sivaraman, 2018

A. Alavudeen, ‎Khalid Hussain Syed And N. Shanmugam, Fluid Power Transmission And Control, Charotar,2007

Anonim, Dual Conveyor & Workcell Systems 34-001 to 34-004, Crowborough England: FI Ltd.

D. Persen, Industrial Automation : Circuit Design and Components, Israel: John Wiley & Sons, 1989.

C. Christos G dan L. Stephane, Introduction to Discrete Event System, New York: Springer Science and Bussines Media, 2008.

Hugh Jack, Automating Manufacturing Systems with Plcs, _______.

PLC CQM1 Instruction manual Omron.

Boothroyd, , G. (2005). Assembly Automation and Product Design .

Boca Raton, Florida, USA, Taylor & Francis

Iskandar, Eka, Mochammad Rameli, and Nicco Nicco. "Ladder Diagram based on State Diagram for Selection and Assembling Part on Dual Conveyor." Journal on Advanced Research in Electrical Engineering 1.2 (2017).

Iskandar, Eka, Mochammad Rameli, and Wildan Ramadhan. "Ladder Diagram based on Huffman Method for Selection and Assembling Part on Dual Conveyor." ISITIA (2018).




DOI: https://doi.org/10.12962/j25796216.v2.i2.50

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.