Optimal Design Of Stand Alone Hybrid PV / WTGS / Battery for Health Center Electricity System in Timor Leste

Alfredo Gusmao, Imam Robandi, Soedibyo Soedibyo

Abstract


The use of renewable energy sources as a power plant has become an alternative option to provide electrical energy sources in a health center in Timor Leste. In this study a standalone hybrid generator system design consisting of Photovoltaic (PV), Wind turbine generation system (WTGS) and battery as energy storage will be made. The PSO algorithm is used to design optimal generator and battery capacity to obtain economic value. Optimal results are obtained by taking into account the potential of wind and solar energy and loads. The application of hybrid generating systems with renewable energy sources has several problems that must be resolved. The energy generated by renewable energy power plants is intermittent. Then this system requires energy storage to achieve power balance. The simulation results in this study show how to get the optimal value by using PSO algoritm, to reach power balance with the optimal and economical design of generator and battery capacity.

 

Keywords: Hybrid; PV; WTGS; Battery; Control, Optimal Sizing, PSO


Full Text:

PDF

References


B. Bhandari, K.-T. Lee, G.-Y. Lee, Y.-M. Cho, and S.-H. Ahn, “Optimization of hybrid renewable energy power systems: A review,” Int. J. Precis. Eng. Manuf.-Green Technol., vol. 2, no. 1, pp. 99–112, Jan. 2015.

J. H. R. Enslin, “Renewable energy as an economic energy source for remote areas,” Renew. Energy, vol. 1, no. 2, pp. 243–248, Jan. 1991.

M. H. Nehrir et al., “A Review of Hybrid Renewable/Alternative Energy Systems for Electric Power Generation: Configurations, Control, and Applications,” IEEE Trans. Sustain. Energy, vol. 2, pp. 392–403, Oct. 2011.

N. R. Tummuru, M. K. Mishra, and S. Srinivas, “Integration of PV/battery hybrid energy conversion system to the grid with power quality improvement features,” in 2013 IEEE International Conference on Industrial Technology (ICIT), 2013, pp. 1751–1756.

O. Tremblay, L. A. Dessaint, and A. I. Dekkiche, “A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles,” in 2007 IEEE Vehicle Power and Propulsion Conference, 2007, pp. 284–289.

A. Pradipta, D. C. Riawan, and Soedibyo, “Power flow control of battery energy storage system using droop voltage regulation technique integrated with hybrid PV/Wind generation system,” in 2018 International Conference on Information and Communications Technology (ICOIACT), Yogyakarta, 2018, pp. 202–207.

T. Dragičević, J. M. Guerrero, J. C. Vasquez, and D. Škrlec, “Supervisory Control of an Adaptive-Droop Regulated DC Microgrid With Battery Management Capability,” IEEE Trans. Power Electron., vol. 29, no. 2, pp. 695–706, Feb. 2014.

T. Ma, M. H. Cintuglu, and O. Mohammed, “Control of hybrid AC/DC microgrid involving energy storage, renewable energy and pulsed loads,” in 2015 IEEE Industry Applications Society Annual Meeting, 2015, pp. 1–8.

S. Dehghan, H. Saboori, A. Parizad, and B. Kiani, “Optimal Sizing of a Hydrogen-based Wind/PV Plant Considering Reliability Indices,” p. 9.

D. Abbes, A. Martinez, and G. Champenois, “Eco-design optimisation of an autonomous hybrid wind–photovoltaic system with battery storage,” IET Renew. Power Gener., vol. 6, no. 5, pp. 358–371, Apr. 2012.

Raji Atia and Noboru Yamada, “Sizing and Analysis of Renewable Energy and Battery Systems in Residential Microgrids,” IEEE Trans. SMART GRID, pp. 1204–1213.

M.-A. Yazdanpanah, “Modeling and sizing optimization of hybrid photovoltaic/wind power generation system,” J. Ind. Eng. Int., vol. 10, no. 1, Apr. 2014.

M. Kandil, M. Saadawi, M. Saeed, and A. Hassan, “Modified particle swarm optimisation technique for optimal design of small renewable energy system supplying a specific load at Mansoura University,” IET Renew. Power Gener., vol. 9, no. 5, pp. 474–483, Jul. 2015.

S.-M. Chen, T.-J. Liang, L.-S. Yang, and J.-F. Chen, “A Boost Converter With Capacitor Multiplier and Coupled Inductor for AC Module Applications,” IEEE Trans. Ind. Electron., vol. 60, no. 4, pp. 1503–1511, Apr. 2013.

F. Liu, S. Duan, F. Liu, B. Liu, and Y. Kang, “A Variable Step Size INC MPPT Method for PV Systems,” IEEE Trans. Ind. Electron., vol. 55, no. 7, pp. 2622–2628, Jul. 2008.




DOI: https://doi.org/10.12962/j25796216.v2.i2.60

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.